You may notice that the “Truman Secure Wireless” network has been found, but due to specific settings needed for a complete connection to the Truman Network this will not allow a proper connection. – A free virus program courtesy of Truman State can be downloaded here.* You will not be prompted for your username and password or to validate the server certificate every time you connect.
These are only needed when you first setup the wireless connection.
You'll need a valid USERTrust primary root certificate in Privacy-Enhanced Mail (PEM) format to validate the IU Secure connection.
To download the certificate: After you've installed the certificate, you can use it as the CA certificate option when setting up an IU Secure connection.
This document is long, but you only need to read the section for the type of device you're trying to use to connect to the network.
Described here are the steps involved in configuring the Dell wireless client under Windows XP to use eduroam, authenticating via PEAP MSCHAPv2.
Gonzaga University uses WPA2 and the mini10 only has WPA.
Is there any solution available short or replacing the NIC or network card with an updated one?
This document will guide you through the process of connecting to the secure wireless network in Windows 7. If you need help setting up your wireless connection you may contact the ITS Helpdesk. Once the wireless tab has opened, select the link marked “Open Network and Sharing Center”. Once the “Network and Sharing Center” windows opens, select the link marked “Set up a new connection or network”. As the “Set Up a New Connection or Network” window pops up select the option marked “Manually connect to a wireless network” and select next. Connection should complete successfully and the wireless icon at the bottom right-hand corner of the screen should show connection status.* Additional installation of Cisco Clean Access and a Anti-Virus Program of your choice will be required before connection can fully complete.- Information on Installing Cisco Clean Access can be found here.
For more information about the wireless network, including coverage areas and general information see the Wireless Network Overview. In this window type in your Truman Student ID and then the Password that correlates with this ID (this id and password are also used for campus computers login and Tru View) and select .